Home > News > Industry News

How to improve the marking speed of laser marking machine equipment?


The purpose of laser marking machine equipment for enterprises is to save labor costs, improve production efficiency and create higher value. So how to improve its marking speed is one of the issues we are more concerned about. So today we will analyze this problem: how to improve its marking speed?

The main factors affecting laser marking machine equipment are divided into internal factors and processing workpieces. The internal factors are mainly laser frequency, laser spot mode and beam divergence angle, laser power, reasonable optical shaping and auxiliary gas during processing. In the early selection and matching, internal factors should be paid attention to, and the opinions of laser engineers should be followed when purchasing. Another factor that customers need to pay attention to when processing is mainly marking density, marking width, marking depth and laser spot size.

Marking Density: The higher the marking density, the slower the corresponding marking for the same format, the same point and the same depth, because the density directly increases the marking area.

Marking width: Due to the increased deflection area of the large-format marking galvanometer, the marking speed of the large-format is slower than that of the small-scale.

Marking depth: According to the requirements, if you need to deepen the marking depth, you need to adjust the parameters of the laser marking machine to increase its power, current and other factors. If the target depth is still not high power, it may be necessary to mark two or more times, so the marking speed will be affected during these processes.

Laser spot size: The smaller the spot, the smaller the marking volume. Therefore, the larger the blob, the faster the marking speed.

We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept